Archer C7 does not allow port forward: "not in lan subnet"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C7 does not allow port forward: "not in lan subnet"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C7 does not allow port forward: "not in lan subnet"
Archer C7 does not allow port forward: "not in lan subnet"
2023-01-07 23:33:22 - last edited 2023-01-07 23:34:30
Tags: #Port Forwarding #subnet
Model: Archer C7  
Hardware Version:
Firmware Version: 1.2.1 Build 20220715 rel.19099(4341)

I am running the Archer C7 with the latest firmware.

 

My LAN address is 10.0.0.1 with mask 255.192.0.0

 

When I try to make any virtual server, the NAT forward refuses to work, and I see this in the System Log:

 

The host ip address is not in the lan subnet [10.10.0.3]

 

Note that this is false! The 10.10.10.3 address falls in the 10.0.0.1 / 255.192.0.0 subnet.

 

Why can I not forward a port to a machine at 10.10.0.3 address?

 

  0      
  0      
#1
Options
1 Reply
Re:Archer C7 does not allow port forward: "not in lan subnet"
2023-01-08 16:12:05 - last edited 2023-01-10 00:45:37

  @Mazarax 

 

While I would agree that the message is false, is there any particular reason for using this subnet mask: 255.192.0.0 ?

With this subnet mask the usable hosts number is 4 194 302. C7 is a home router device with limited HW resources, which can serve about 50 client devices.

Using 24 bit subnet mask (i.e. 255.255.255.0) will give you the most realistic behavior for such type of device.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 450

Replies: 1

Tags

Related Articles