NAT Loopback AX53

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NAT Loopback AX53

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
NAT Loopback AX53
NAT Loopback AX53
2023-03-15 18:15:40 - last edited 2023-03-17 10:41:23
Tags: #Port Forwarding #DDNS #NAT loopback
Model: Archer AX53  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20220609 rel.63858(4555)

Hello!

 

So, my problem is like this : i can't access a synology device from within my LAN using DDNS. Only from external networks. Inside my LAN, only with LAN IP. Port forward is done ok, since i can access it from external source. 

 

Any sugestions?

Thank you. 

  0      
  0      
#1
Options
5 Reply
Re:NAT Loopback AX53
2023-03-17 08:51:33

Hello @oxyg3n 

 

Can I confirm how are the AX53 and AX3000 connected to the network? Can you please show us the detailed network layout and the IP addresses for each device?

 

Is the Synology device connected to the AX53 via LAN cable, or is it connected to the AX3000?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:NAT Loopback AX53
2023-03-17 09:14:24

  @Kevin_Z the AX53 and AX3000 are the one and the same device, not 2 separate devices. On the box it's written AX3000 and below it AX53. 

 

As for the connection, it is wired, and the portforward is ok. I tried putting the NAS on DMZ, and the problem is the same. From inside LAN, only via local IP can i access it. From outside LAN, i can access via webadress. 

  0  
  0  
#3
Options
Re:NAT Loopback AX53
2023-03-21 07:37:16

@oxyg3n 

 

I see. Sorry for the misunderstanding.

 

Are you able to access the NAS from the local network by using the public IP address + port number? What is the error message if it also fails?

 

Can I also know what is the specific reason that you want to access the NAS from the local network by DDNS? We may need to confirm if there is an issue with the support engineers.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:NAT Loopback AX53
2023-03-21 16:45:19

  @Kevin_Z 

 

From LAN, I can't access the NAS using Public IP (5.13.2xx.xxx) + port number. I says that it takes too long.

From outside LAN, same Public IP + port number works like a charm.

I want to access it from same DDNS, even on LAN, for ease of access. The dedicated apps from Synology work with Domain Name or IP adress, so it's easier to use the same DDNS, than an IP from LAN and Domain Name from outside.

 

  0  
  0  
#5
Options
Re:NAT Loopback AX53
2023-03-22 01:35:04

@oxyg3n 

 

Thanks very much for sharing all the detailed info.

 

To address the issue and try to fix it, we would like to have a specialist look into this further via email. Please check your mailbox later, and let us know if the issue is resolved.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 810

Replies: 5

Tags

Related Articles