Hairpin/NAT loopback problem

Hairpin/NAT loopback problem

Hairpin/NAT loopback problem
Hairpin/NAT loopback problem
2024-09-13 05:49:08 - last edited 2024-09-29 01:31:30
Model: Archer A8  
Hardware Version: V2
Firmware Version: Firmware Version: 1.13.2 Build 230824 Rel.75032n(4555)

I am using Dyndns service and it seems to work ok but when I am going to connect my virtual server connection takes a lot of time but it finally works. Is there something I can do to find out what may be the reason for long delay during connection.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Hairpin/NAT loopback problem-Solution
2024-09-13 08:56:13 - last edited 2024-09-29 01:31:30

  @penatar 

Hi,

 

Please use nslookup command to check how long it takes to find the domain name.

And you can provide us the results to check.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Hairpin/NAT loopback problem-Solution
2024-09-13 08:56:13 - last edited 2024-09-29 01:31:30

  @penatar 

Hi,

 

Please use nslookup command to check how long it takes to find the domain name.

And you can provide us the results to check.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Hairpin/NAT loopback problem
2024-10-11 05:27:28 - last edited 3 weeks ago

  @Sunshine nslookup does not give a solution to the problem. When I connect to the home network from outside network, the response time is significantly faster compared to the situation when I connect from the home network to the home network using the DDNS service.

 

Are there any settings in the router that affect hairpin/loopback operation?

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 186

Replies: 2

Related Articles