[Closed] Beta Firmware with EasyMesh for PGW2440

[Closed] Beta Firmware with EasyMesh for PGW2440

[Closed] Beta Firmware with EasyMesh for PGW2440
[Closed] Beta Firmware with EasyMesh for PGW2440
2023-04-14 06:44:15 - last edited 2024-02-23 03:32:03
Model: PGW2440 KIT  
Hardware Version: V1
Firmware Version:

Update: Official firmware of PGW2440 has already support EasyMesh, you could download official firmware from our official website:

Download for PGW2440 KIT

 

Hello everyone,

 

We are currently working on the production version of EasyMesh firmware of PGW2440 KIT and we'd like to provide early access to the beta version here with the community. Welcome to download and install this beta for trial to build EasyMesh network with routers and this PGW4220 powerline extenders.

 

Download link for the beta firmware:
PGW2440(EU)_V1_230406_EasyMesh

 

Note: Be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding!

 

To know more about TP-Link G.hn Powerline Network, please visit G.hn-Next Generation of Powerline Network.


With this firmware installed, you will be able to connect PGW2440(EU) 1.0 to an EasyMesh router to build a seamless Wi-Fi network, you could visit the following article to know more about EasyMesh and how does it work with TP-Link routers and extenders:
What is Wi-Fi EasyMesh and how does it work with TP-Link routers and extenders?

 

 

Steps to add PGW2440(EU) 1.0 to an EasyMesh network


1) Plug a G.hn powerline adapter and the PGW2440(EU) 1.0 in the same electrical circuit, and pair them together.

2) Connect the G.hn powerline adapter to your EasyMesh router via Ethernet cable, and you will have internet access from the PGW2440(EU) 1.0.
3) Login to your EasyMesh router web interface, go to Advanced > EasyMesh, enable EasyMesh, and add the PGW2440(EU) 1.0 as a satellite device.

 

If you have any inquiries or encounter any problems with the beta firmware, please leave your comment here in the community. We'd be happy to help.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1      
  1      
#1
Options
5 Reply
Re:Beta Firmware with EasyMesh for PGW2440
2023-04-20 08:50:20

  @Sunshine is there any beta firmware for PG2400P KIT?

  0  
  0  
#2
Options
Re:Beta Firmware with EasyMesh for PGW2440
2023-04-20 09:00:24

  @lugam0dder 

 

Hi, EasyMesh is used to build a seamless wireless network, PG2400P is wired poweline adapter which doesn't support Wi-Fi function, thus I am afraid it could not support EasyMesh. 

 

If there is any issue with your PG2400P, it is recommended to start a new thread and provide more details, we will try our best to assist.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:Beta Firmware with EasyMesh for PGW2440
2023-12-19 16:55:00 - last edited 2023-12-19 16:55:15

  @Sunshine When will this firmware come to WPA7517 V2 and WPA8631P V3 ?

  0  
  0  
#4
Options
Re:Beta Firmware with EasyMesh for PGW2440
2024-02-22 11:44:36

  @Sunshine Sorry if this is a silly question, but does the PGW2440 support ethernet backhaul (over powerline) as part of an easymesh network? 

Thanks!

  0  
  0  
#5
Options
Re:Beta Firmware with EasyMesh for PGW2440
2024-02-23 03:29:18

  @GrahamMore 

 

Hi, for powerline devices, the regular usage is to connect one powerline unit to your router and one powerline extender in other locations.

After the powerline extender supports EasyMesh, it could establish a mesh network with the router, but the powerline adapter still needs to connect the router via Ethernet cable to receive internet access, I guess that is what you mean, if so, it should work.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#6
Options