How can I assign a client to a specific deco (X20 or M4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How can I assign a client to a specific deco (X20 or M4)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How can I assign a client to a specific deco (X20 or M4)
How can I assign a client to a specific deco (X20 or M4)
2023-04-19 09:34:46
Model: Deco X20   Deco M4  
Hardware Version:
Firmware Version:

My client Panasonic Smart TV connects to the main deco in the basement instead of the deco right next to it - which is connected to the main deco in the basement with an ethernet cable!

 

Due to the concrete ceiling, WLAN reception is pretty poor but the WLAN reception of the deco right next to the TV would be 100%! Why does the TV not connect to the deco with the better reception??

 

QUESTION: How can I assign a specific client to a specific deco (X20 or M4)?

 

Thanks!

  0      
  0      
#1
Options
4 Reply
Re:How can I assign a client to a specific deco (X20 or M4)
2023-04-19 11:53:05

  @juewi 

 

If you have Satellite Deco next to TV, it makes sense to connect them by Ethernet cable. Most TVs nowadays have Ethernet port.

 

Also, check the following FAQ document: Get to Know Fast Roaming / Seamless Roaming on a Deco System , scroll to "Q2: Why my clients roam to the Deco node farther away?"

 

  0  
  0  
#2
Options
Re:How can I assign a client to a specific deco (X20 or M4)
2023-04-19 12:11:54

  @Alexandre. Thanks for the answer. Yes, i had the idea to connect with ethernet-cable if all other WLAN-attends fail. yes

But i hoped it would exist an solution via deco-software for "forced" WLAN-connecting.

  0  
  0  
#3
Options
Re:How can I assign a client to a specific deco (X20 or M4)
2023-04-19 12:53:39

  @juewi 

 

You can't force connection with X20s and M4s. Here is the list of all Deco models that support this feature, and Deco mesh must consist only of these models to allow assigning clients to a specific Deco: https://community.tp-link.com/us/home/forum/topic/597476

 

From my experience with Sony TV connected wirelessly to nearby Deco unit, WiFi link is never ideal for video streaming. While watching 4K content, even slight and brief WiFi interference from somewhere forces streaming app on TV downgrade picture quality briefly, it is noticeable and gets annoying real fast. After wiring Deco and TV together by Ethernet cable, the problem went away.

  0  
  0  
#4
Options
Re:How can I assign a client to a specific deco (X20 or M4)
2023-04-21 06:32:17

  @Alexandre. 

 

Here is the answer from the support team:

 

Here you can check the steps.

https://www.tp-link.com/de/support/faq/3480/

 

The feature is not yet supported by all Deco models. The Deco M4 with the version V4 and the latest firmware supports it already, but the X20 not.
Please update the firmware and check if the feature is already added.

 

I have the X20 and the M4 version V2, so it doesn't work unfortunately.

But it´s no big problem, thanks anyway for your help yes
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 568

Replies: 4

Related Articles