ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC
ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC
2024-03-22 12:06:18 - last edited 2024-03-23 10:36:39
Model: Archer AX53  
Hardware Version:
Firmware Version:

Hi, I just bought this product, I am very happy with it but I have got a small problem. my tower pc is in the farthest point of the house when I tried to connect it to the wifi 6, it automatically assigned 5mhz to the pc and for 5 minutes connect and disconnect it from the network, after 5 minutes the router the 2.4MHZ to the PC and it works perfectly withouth any problem. how can I explaine to the router to assign directly 2.4MHZ to the pc, without trying the 5MHZ first?

  0      
  0      
#1
Options
1 Accepted Solution
Re:ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC-Solution
2024-03-22 23:06:04 - last edited 2024-03-23 10:36:39

  @SDF89PA 

 

Hi,

 

The router cannot assign the PC to a certain band. This decision is up to the PC.

 

There are two things you could do.

 

1) Stop using the "Smart Connect" feature of the router and instead use different network names for 2.4 GHz and 5 GHz.

 

2) In the Windows Device Manager go to the properties of your PC's network card and check whether it provides a "Preferred Band" option that you can set.

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC-Solution
2024-03-22 23:06:04 - last edited 2024-03-23 10:36:39

  @SDF89PA 

 

Hi,

 

The router cannot assign the PC to a certain band. This decision is up to the PC.

 

There are two things you could do.

 

1) Stop using the "Smart Connect" feature of the router and instead use different network names for 2.4 GHz and 5 GHz.

 

2) In the Windows Device Manager go to the properties of your PC's network card and check whether it provides a "Preferred Band" option that you can set.

 

Recommended Solution
  0  
  0  
#2
Options
Re:ASSIGN 2.4MHZ CHANNEL TO A SPECIFIC PC
2024-03-23 10:37:56
Thanks a lot!!! I have sorted the problem in 5 seconds using the second solution you suggest me, I really appreciate it! Fantastic information.
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 368

Replies: 2

Related Articles