4G+ constantly switching on/off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

4G+ constantly switching on/off

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
4G+ constantly switching on/off
4G+ constantly switching on/off
2023-05-11 12:24:10
Model: Archer MR600  
Hardware Version: V3
Firmware Version: 1.0.0 0.9.1 v0001.0 Build 220307 Rel.60743n

As you can see above it switches every couple seconds and produced a 32 page log withing a few minutes. and speeds are varying greatly between 40 and 110 with my phone 4g+ speed reaching 200.
How do I solve it and get a higher stable speed? I've tried auto and manually selecting bands, I am supposed to get best results with B1 and B7 (180 ish) but both wont stay connected.
Any tips are appreciated

  5      
  5      
#1
Options
7 Reply
Re:4G+ constantly switching on/off
2023-05-11 13:58:17

It's a known problem for all MR600 versions since many months.

https://community.tp-link.com/en/home/forum/topic/603932
https://community.tp-link.com/en/home/forum/topic/579834?replyId=1129026

 

  0  
  0  
#2
Options
Re:4G+ constantly switching on/off
2023-05-11 14:01:25

  @kernash sadThats dissapointing, just bought the thing because of the 4g+

  0  
  0  
#3
Options
Re:4G+ constantly switching on/off
2023-05-12 01:50:12

  @arneman 

 

May I know the model no. of your phone? and if it always stays on 4G+ all the time, please check the band working on the phone as well, please share with us the screenshot

How to check the 4G band working on our smartphones

 

In addition, who is your ISP please?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:4G+ constantly switching on/off
2023-05-12 14:58:46

  @Sunshine 
I have a Oneplus AC2003 (Nord) and the 4g+ remains on, the band I can see it using are all three I think (1, 7, 20) alternating as (serving) in the app but seems to be mostly on 20. 160 on the test currently, when I manually chose bands on the router, the speed was fastest using 7 slower on 1 and slowest on 20
I have 3 or Tre as my ISP (Sweden)

  0  
  0  
#5
Options
Re:4G+ constantly switching on/off
2023-05-12 16:21:54

  @arneman 

 

Hi, I have exactly the same problem (see: https://community.tp-link.com/en/home/forum/topic/603932 )

 

I am in touch with the TP-Link Support team in Asia, and have now also contacted the team in Germany. Hope they get this fixed.

 

Best

  2  
  2  
#6
Options
Re:4G+ constantly switching on/off
2023-05-12 17:39:41

  @MobileRouter Thats good to hear, glad your in contact with them, hope they solve itlaugh

  0  
  0  
#7
Options
Re:4G+ constantly switching on/off
2023-05-15 03:17:40

  @arneman 

 

Hi, when you set band as Auto on the MR600, may I know which band(s) it selects automatically? 

Since you mentioned that it constantly switches between 4G and 4G+, please provide band information when it is on 4G and also when it is on 4G+.

 

 

Besides, which band combinations you've tried when selecting 4G band manually?

It seems that your phone aggregates three carriers B20+B1+B7, please note that the MR600 could only aggregate two carriers at most, since the main band on your phone is band 20, it is recommended to try 20+1, or 20+7 on the MR600.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#8
Options