Easy Mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Easy Mesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Easy Mesh
Easy Mesh
2023-09-13 22:09:21
Model: Archer C64  
Hardware Version: V1
Firmware Version: 5553

Saludos. He comprado 3 router Archer C64 he usado 2 en mi casa, los he configurado con Easy Mesh pero el Roaming no funciona muy bien, me alejo lo suficientemente de mi router principal como para que se caiga la conexión y no hace el cambio al 2 router que está en modo satélite. Solo en el momento que me desconecto del primero es cuando detecta la señal del segundo y aumenta el nivel de señal y hace la conexión. ¿Alguien ha tenido una experiencia similar ? O tiene alguna solución. Cabe destacar que el 2do Router está conectado vía cable Lan al principal con backhaul  y ambos están actualizados a la última versión disponible 

  0      
  0      
#1
Options
2 Reply
Re:Easy Mesh
2023-09-14 03:48:05

  @HnrHdz 

 

Generally, your client device will connect to the nearest AP. However, there are still some clients sticking on an AP further away, because it doesn't reach the roaming threshold yet. 

For AP steering among different EasyMesh nodes, only when the signal strength of the current AP becomes lower than a threshold and the signal strength of another AP is good enough, the AP will recommend clients to roam.

 

What's more, the EasyMesh products can only provide a roaming suggestion. Whether to roam or not depends on the client itself as it has its own roaming threshold as well, which is decided by its manufacturer. In this case, clients may refuse the roaming suggestion or respond slowly causing the delay of roaming. There are also some clients that may decide to roam even though the AP doesn't recommend roaming yet.


If your client doesn’t roam to the nearest AP, please take it easy, the client still has a good connection in most cases. If you find the client's signal is too weak, please try to power cycle it, and it will usually select the nearest AP to connect.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Easy Mesh
2023-09-14 04:37:18

  @Sunshine  Muchas gracias por tomarte un momento para responder. 

La Duda que me surge es la siguiente. El Dispositivo Cliente al acercarse al AP con mejor señal ¿debería desconectarse por completo del AP anterior? 

 

Por lo que entiendo,  el Dispositivo Cliente al hacer el Roaming simplemente debería aumentar el indicador de señal sin desconectarse en ningún momento, ya que a eso se refiere la tecnología Mesh, conexión sin interrupción. 

 

Intentaré probar diferentes Dispositivos clientes y así ver qué tal se comportan y ver si hay alguna diferencia.

 

Gracias yes

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 635

Replies: 2

Related Articles