Home Network Community > All Threads > RE305 loses connection
< All Threads

RE305 loses connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE305 loses connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE305 loses connection
RE305 loses connection
2023-12-04 16:32:42
Tags: #Network Connectivity
Model: RE305  
Hardware Version:
Firmware Version:

My RE305 is connected via WiFi to a Speedport Router  Every other day it will drop this connection and all attached devices fail. The location is not very far and the range finding LED is ok with the distance. I am using it as devices a wall further away have connection problems at only 30% receiver strength.

 

So connecting the RE305 is not a problem initially, but it only lasts afew hours. When I notice, I need to unplug/replug it to reconnect.

 

I can access/connect to it via the router, but can only see IP and MAC.

 

What can I do?

 

Thanks for any help.

  0      
 
  0      
 
#1
Options
2 Reply
Re:RE305 loses connection
2023-12-08 11:21:54

  @FredManning 

Hi, would the 2.4GHz and 5GHz LEDs on RE305 still light up during the disconnection?

Did you test the Ethernet connection from RE305 as well?

It is also suggested to refer to this link to edit the wireless settings on the Speedport router to see whether it helped:

Recommended settings on the host router to work well with TP-Link Range Extenders

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:RE305 loses connection
2023-12-10 12:22:22

  @David-TP 

Hi and thanks for your reply.

2.4GHz and 5GHz LEDs: no, both are off. Only Power is on.

Ethernet connection: No, I don't have anything I can connect via cable.

Also, it's not the connection to attached devices that is the problem, but the connection to the router.

I have not found any MAC settings or limitations on the router. The bands are set to auto and a check shows they are used, but not crowded like the lower bands for some reason.

The router is new and I have never really used the extender up until now. I also have an RE230, but that worked even less.

The distance is not that far, NetSignal says it's around -68 dB at that location.

 

I simply can't figure out why it should lose the connection after a day or so.

 

Thanks

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 385

Replies: 2

Tags

Network Connectivity
Related Articles
RE305 connection problems
1601 0
The starlink router’s 5ghz is not detected by RE305
708 0
RE305 as access point, poor connection speed
1296 0
RE305 Connection issue
421 0
RE305 lose connection
663 0
RE305 not connecting to 5g network
1647 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.