The starlink router’s 5ghz is not detected by RE305
The starlink router’s 5ghz is not detected by RE305
Hello Tp-link
i am not able to connect to router thru RE305. The router I am using is Starlink and I am unable to change the wifi channel on this router. It certainly is the RE305 problem as per old thread I have read. Till now it he 5G connection was seen only once and that was before the firmware update. So please help. I have attached the screenshots which were requested in old threads.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Here is a beta firmware that might help with the current issue. You could find the download link in the private message.
Moreover, The UK version of wireless extender is planned to open band 4 for 5GHz.
Thanks again and best regards.
- Copy Link
- Report Inappropriate Content
Hi,
What channel is used by the Starlink router in the 5 GHz band?
Note that TP-Link Dual band Range Extenders made for the European market (have the letters "EU" printed on the serial number sticker) do not support channels 149 to 165.
- Copy Link
- Report Inappropriate Content
hi
That is the thing. This starlink router doesn’t let you in. There is no interface to login. The app has the options to change wifi names and passwords and splitting the wifi in 2.4 and 5 ghz network radio and that’s about it. If it was I could have done something myself. It doesn’t say but it says UK. The relevant photos are attached.
- Copy Link
- Report Inappropriate Content
Despite the UK not being part of the EU anymore, I am pretty sure TP-Link wireless devices made for the UK market follow the same rules.
I am afraid there will be no straight solution for this problem. Any other TP-Link range extender model for the UK would be the same.
Potential solutions:
- Try to get hold of a range extender made for the US market. It will support those 5 GHz channels, but of course will only be usable in the UK with an additional adapter for the wall socket.
- Set the Starlink router to "Bypass" mode (so that it will basically work as just a modem) and then connect a separate Wi-Fi router to it that allows selection of Wi-Fi channels.
- Copy Link
- Report Inappropriate Content
Hi, Thank you very much for the feedback.
Here is a beta firmware that might help with the current issue. You could find the download link in the private message.
Moreover, The UK version of wireless extender is planned to open band 4 for 5GHz.
Thanks again and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, Is it also RE305 (UK)V4.0?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 656
Replies: 16
Voters 0
No one has voted for it yet.