Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN
Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN
2024-01-27 13:30:53
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.5.8

Hello,

 

I'm trying to get working Deco M4R (3pcs) on fibre optic internet provider with IPTV. I have configured PPPoE and IPTV on Main Deco following ISP specifications.

But ethernet backhaul don't work together with IPTV. My questions: Can i use ethernet bakhaul for 2 Deco Satelites? Wich cases are possible?

 

Thank you in advance

 

Ethernet backhaul with IPTV

  0      
  0      
#1
Options
3 Reply
Re:Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN
2024-01-27 15:17:07

  @ccnl 

 

Someone I had conversation with recently have found workaround by configuring iPTV port on one of Satellite Deco instead of Main Deco. Check if you have that option with your Deco mesh.

See How to Configure IPTV function on Deco

 

  0  
  0  
#2
Options
Re:Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN
2024-01-28 10:42:20

Alexandre. wrote

Someone I had conversation with recently have found workaround by configuring iPTV port on one of Satellite Deco instead of Main Deco. Check if you have that option with your Deco mesh.

 

 

  @Alexandre. Thanks for your reply, i have the option IPTV on Satellite, but i need a Multicast Forwarder to get IPTV working. I think that is only possible in the main deco. In this topic Deco M4 multicast IPTV, wrote @David-TP "If you want to enable the IPTV service, please ensure you connect the TV box to the main Deco's Ethernet port, it cannot be in the Ethernet port of the satellite Deco."

  0  
  0  
#3
Options
Re:Deco M4R V2 on fibre optic PPPoE with IPTV/VLAN
2024-01-28 12:59:14 - last edited 2024-01-28 13:09:23

  @ccnl 

 

The conversation you refer to is from 2020. In 2020, there was no option to configure IPTV port on Satellite Deco. 

I think TP-Link added that option exactly for situations like yours: when someone needs to have IPTV enabled, but wants to have Ethernet backhaul to Main Deco.

 

Try configuring IPTV port on Satellite Deco, if you have that option. It may just work.

 

If it does not, from three options you listed for Main Deco M4 first two won't work. You can only have IPTV port or Ethernet link, not both. Third option, with WiFi backhaul, will work but it will leave your Deco mesh without Ethernet backhaul to Main Deco.

 

There is another option: get Deco unit with three Ethernet ports, such as X50 or X55, make it your Main Deco. With three Ethernet ports you can have one for WAN, another for LAN with switch and Ethernet backhaul, and third port will be IPTV port.

 

 

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 587

Replies: 3

Related Articles