Deco S7 and Switch LS1005G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco S7 and Switch LS1005G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco S7 and Switch LS1005G
Deco S7 and Switch LS1005G
2024-04-19 16:39:20
Model: Deco S7   LS1005G  
Hardware Version: V1
Firmware Version: 1.4.5

I connected my router to the main deco S7 then main Deco to switch LS1005G and from the switch 2 other Deco S7 too but in the digram I found the 3rd deco connected to the 2nd deco and 2nd deco to main deco wifi not Cable. Any one know how to solve and make all the 3 connected cable.

 

  0      
  0      
#1
Options
5 Reply
Re:Deco S7 and Switch LS1005G
2024-04-19 19:58:32

  @SimonHanna 

 

I know of one special case when that happenes, but I will need you to run the test to see if this is it.

 

The test:

 

Power off Living Room Deco. Wait till this is reflected in Deco app, that Living Room Deco is offline. Check how Hallway Deco is now connected, it should be one of the following:

 

1. Stays on Ethernet;

2. Switched to WiFi;

3. Can't connect at all and also reported as offline.

 

 

If this is the special case I think of, the result should be #2 or #3.

 

 

  0  
  0  
#2
Options
Re:Deco S7 and Switch LS1005G
2024-04-19 22:13:24 - last edited 2024-04-19 22:15:07

  @Alexandre.  

It was wifi as show in digram 

  0  
  0  
#3
Options
Re:Deco S7 and Switch LS1005G
2024-04-19 22:14:31

  @Alexandre. When connected again it stay in wifi and living room cable

 

  0  
  0  
#4
Options
Re:Deco S7 and Switch LS1005G
2024-04-19 22:17:37

  @Alexandre. 

I try to change the main deco with another one satellite and reconfigure but still main deco connect as Wifi even after reset and reconfigure. I Can't find a way where I can conect them all by cable.

  0  
  0  
#5
Options
Re:Deco S7 and Switch LS1005G
2024-04-19 23:53:35

  @SimonHanna 

 

It is definitely that special case. You should check Ethernet link between switch and Main Deco - it is broken. 

 

I explained it here: https://community.tp-link.com/en/home/forum/topic/655034?replyId=1319560

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 697

Replies: 5

Related Articles