Home Network Community > All Threads > Using X50 Pro and x60 together (what to set as main) ?
< All Threads

Using X50 Pro and x60 together (what to set as main) ?

Using X50 Pro and x60 together (what to set as main) ?

Using X50 Pro and x60 together (what to set as main) ?
Using X50 Pro and x60 together (what to set as main) ?
2024-05-29 12:29:54
Tags: #Installation #Connection Preference #2.5 Gbps #Network Connectivity #X50 Pro
Model: Deco X60  
Hardware Version:
Firmware Version:

Originally my setup was Deco X60(main) and 2 Deco M5.  I've purchased a triple pack Deco x50 Pro for the 2.5Gp ports to upgrade my system.   If I want to continue to use x60 with x50s, which unit should be set as the main unit?  

 

My plan was to using the x50 pro its 2.5 Gbps as the main unit connected directly to the fiber modem since it also has a 10Gbps port.   If I put the Deco x60(ethernet backhaul) as satellite will this have a negative impact overall?  

 

Thanks in advance.

  0      
 
  0      
 
#1
Options
1 Reply
Re:Using X50 Pro and x60 together (what to set as main) ?
2024-05-29 19:17:23

  @Blu_Cobalt 

 

If you need faster that gigabit speeds to Internet through your Deco mesh, X50 Pro with 2.5Gbps ports should be your Main Deco.

 

Using X60 as Satellite with X50 as Main Deco will not have negative impact. They will work together with no issues, and will negotiate gigabit speed over Ethernet backhaul with each other.

  2  
  2  
#2
Options

Information

Helpful: 0

Views: 477

Replies: 1

Tags

Installation Connection Preference 2.5 Gbps Network Connectivity
X50 Pro
Related Articles
Can I mix Deco X60 with X50?
1148 0
Cannot set up Deco X50 about to return
49 0
How to set up Deco X60 without Ethernet?
140 0
Dexo XE75 Pro QoS unable to set 2 Gbps (2000 Mbps)
48 0
switch behind X60
647 1
PPPoE fails to connect using X60 and Xz000-g3
582 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.