Logging with Archer VR2100v2

Logging with Archer VR2100v2

Logging with Archer VR2100v2
Logging with Archer VR2100v2
2024-06-12 06:40:23 - last edited 2024-06-13 07:45:31
Model: Archer VR2100v  
Hardware Version: V2
Firmware Version: 1.17.0 0.9.1 v009e.0 Build 230831 Rel.3356n

Hello everyone,

We have the problem that our Internet access keeps failing. Vodafone, however, says that the problem lies with us. I have had all the lines from the cellar to the apartment tested. There are no technical problems.

Is there a way to log the internet access on the TP Link Archer VR2100v2 so that you can see if the internet is down or not?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Logging with Archer VR2100v2-Solution
2024-06-12 19:17:27 - last edited 2024-06-13 07:45:31

  @amarradi 

 

See this how to login DSL modem router WebGUI.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Logging with Archer VR2100v2-Solution
2024-06-12 19:17:27 - last edited 2024-06-13 07:45:31

  @amarradi 

 

See this how to login DSL modem router WebGUI.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Logging with Archer VR2100v2
2024-06-13 07:49:56

  @amarradi 

 

Hi, thanks for posting question here.

If the DSL LED goes off when the problem occurs, please review the following troubleshooting steps:

    1. Contact your Internet service provider to confirm that the connection is stable.

    2. Try using another DSL cable to connect the modem router to the DSL jack.

    3. Reset the modem router by pressing and holding the Reset button.

 

If the DSL LED is on but the wireless connection is unstable, please review the following troubleshooting steps:

    1. Check whether the wireless connection will be automatically restored. Check the Wi-Fi LED on the router when it happens and see if the wireless network can be found via your end devices.

    2. Change the wireless channel, channel width, or get away from a wireless interference source, such as a microwave oven, etc.

    3. Upgrade the firmware if it’s not the latest firmware.

 

If the DSL LED is on but both the wired and wireless connections are unstable, please review the following troubleshooting steps:

    1. Contact your Internet service provider to confirm that the connection is stable.

    2. Log in to the web management interface of the modem, get a screenshot of DSL Status page, and save the system log.

    3. Contact our support with the information above for further help and tell us who your internet service provider is.

 

For more details, please refer to this FAQ.

Still having issues? You may also contact local support to confirm further.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 319

Replies: 2

Related Articles