Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

< All Threads

How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

Gaurab485

2024-07-20 07:01:57 - last edited 2024-07-22 07:15:54

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2024-07-20

How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

2024-07-20 07:01:57 - last edited 2024-07-22 07:15:54

Tags: #Network Connectivity #VPN #Installation

Model: Archer AX23

Hardware Version:

Firmware Version:

Hello Community members,

I need some help with the following.

My ISP router has Static public IP set on the WAN port. The ISP router LAN Port has IP 192.168.1.1.

Archer AX23 WAN has IP 192.168.1.2 and LAN IP is 192.168.2.1. DHCP Server is 192.168.2.60 to 90. Port triggering for 1194 port done on both ISP and AX23 routers. Internet access is fine on the home network.

I have enabled OpenVPN on AX23 with all default settings. Generated & exported certificate for home network and internet access.

Installed ovpn file on a client machine on OpenVPN Client software but unable to connect.

What more should I do? Any article to the right direction or advice will be highly appreciated.

Thanks & best regards,

Gaurab Dey

1 Accepted Solution

Gaurab485

LV1

2024-07-22 07:15:40 - last edited 2024-07-22 07:15:54

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2024-07-20

Re:How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.-Solution

2024-07-22 07:15:40 - last edited 2024-07-22 07:15:54

Hi @Sunshine,

Thank you for your reply.

I have successfully created the required VPM tunnel.

My ISP provided router don't have VPN server feature hence I had to purchase AX23.

I opened 1194 port on the ISP router and modified the ovpn file where I replaced the AX23 WAN IP with the ISP provided Public IP and that made the connection successful.

I am writing this so that anyone with similar problem can get the problem resolved.

Thanks again!!

Best regards,

Gaurab

Recommended Solution

2 Reply

Sunshine

2024-07-22 07:09:03

Posts: 6875

Helpful: 1132

Solutions: 719

Stories: 0

Registered: 2018-12-17

Re:How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

2024-07-22 07:09:03

@Gaurab485

Hi,

Did you open port 1194 on the ISP router for the AX23?

In your topology, AX23 is not getting a public IP address, therefore the VPN connection would fail.

For your case, a simple way is to set up the VPN server on the ISP router directly.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

Gaurab485

LV1

2024-07-22 07:15:40 - last edited 2024-07-22 07:15:54

Posts: 2

Helpful: 0

Solutions: 1

Stories: 0

Registered: 2024-07-20

Re:How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.-Solution

2024-07-22 07:15:40 - last edited 2024-07-22 07:15:54

Hi @Sunshine,

Thank you for your reply.

I have successfully created the required VPM tunnel.

My ISP provided router don't have VPN server feature hence I had to purchase AX23.

I opened 1194 port on the ISP router and modified the ovpn file where I replaced the AX23 WAN IP with the ISP provided Public IP and that made the connection successful.

I am writing this so that anyone with similar problem can get the problem resolved.

Thanks again!!

Best regards,

Gaurab

Information

Helpful: 0

Replies: 2

How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

How to configure OpenVPN on Archar AX23 when static IP is set on ISP router.

Information

Voters 0

Tags