One Mesh

One Mesh

One Mesh
One Mesh
2024-07-31 01:47:59 - last edited 2024-08-13 03:03:36
Hardware Version:
Firmware Version:

I see the spec that acher c6 and acher c64 supports one mesh. However, I cannot find way to connect c6 and c64. Can someone provide insights on how to get this working?

  0      
  0      
#1
Options
1 Accepted Solution
Re:One Mesh-Solution
2024-07-31 14:37:29 - last edited 2024-08-05 03:53:46

  @TPUserNorm 

 

That depends on which hardware version is your C6. If its HW version is v4 you can use this guide for configuring Easymesh.

If C6 is bellow HW v4 you should use it as your main router and C64 as a satellite device and try the WPS method.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:One Mesh-Solution
2024-07-31 14:37:29 - last edited 2024-08-05 03:53:46

  @TPUserNorm 

 

That depends on which hardware version is your C6. If its HW version is v4 you can use this guide for configuring Easymesh.

If C6 is bellow HW v4 you should use it as your main router and C64 as a satellite device and try the WPS method.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:One Mesh
2024-08-11 13:46:27

  @terziyski 

 

Thanks for the recommended solution. I purchased an Archer BE230 as (main router). 

 

* C64 can be added as a satellite router = good

* C6 v2 cannot be added as satellite router

 

Is there way to add c6 as a satellite router in EasyMesh?

  0  
  0  
#3
Options
Re:One Mesh
2024-08-11 13:52:00 - last edited 2024-08-12 09:06:16

  @TPUserNorm 

 

You can't add Archer C6 v2 to Easymesh because it supports Onemesh only - Archer C6 v4 supports Easymesh. Here's the difference between mesh networks in more details.

You can still use the C6 v2 as an access point or a range extender (through its WDS feature) though - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:One Mesh
2024-08-12 02:04:27

  @terziyski 

 

Thanks again for details. I cannot find C6 v2 WDS feature to extend the coverage for main router. It can only be cabled to the main or satellite router as AP?

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 333

Replies: 4

Related Articles