QoS issues

QoS issues

QoS issues
QoS issues
2024-08-10 13:29:17
Model: Deco XE75 Pro  
Hardware Version: V1
Firmware Version: 1.2.5

I have a BT fibre connection giving 930mbps down and 110mbps up. I have attempted to use QoS to reduce the latency when uploading, but this feature does not work properly.

 

Firstly, it does not take effect at all unless a device is added to the high priority list.

 

Secondly, when QoS does take effect (device added to priority list), it results in a reduction in downstream speed when set to an appropriate speed for my connection (e.g. 900). Speed tests and real world downloads then give speeds of only around 400mbps.

 

 

  0      
  0      
#1
Options
1 Reply
Re:QoS issues
2024-09-03 07:39:51

  @BenH46 

Hi, welcome to the community.

Deco XE75 Pro currently only support Device Priority under QOS and I don't think it could help reduce the uploading latency.

It is suggested to connect the client via an Ethernet cable to the nearst Deco if possible.

If it is Wi-Fi only, please try to connect it to the 5GHz or 6Ghz, then disable the "Mesh Technology" in the device settings on the Deco APP.

Thank you very much and best regards.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 154

Replies: 1

Related Articles