Home Network Community > All Threads > RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
< All Threads

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?

RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
a week ago - last edited a week ago
Tags: #OneMesh #EasyMesh
Model: RE200   Archer VX1800v  
Hardware Version: V5
Firmware Version: 1.0.23

So my problem starts with web page.

https://www.tp-link.com/en/home-networking/range-extender/re200/v5/#specifications
This link clearly shows my just-bought RE200 V5 supports EasyMesh which is compatible with my VX1800v device. 

However I just found out that the device is not compatible with EasyMesh, it is for OneMesh. Now I am getting an error that I cannot use two devices together as a mesh system.

Any possible solution? Any firmware update planned to any device? Any work around?

Thanks.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution
a week ago - last edited a week ago

  @trioxify 

 

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

 

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
a week ago

  @trioxify 

 

Hi,

 

According to the firmware update notes EasyMesh was added to the RE200 V5 in firmware version 1.0.23.

https://www.tp-link.com/en/support/download/re200/v5/#Firmware

 

Can you please post a screenshot that shows the error you are getting?

  0  
  0  
#2
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
a week ago
Extender settings screen Extender sertings screen

 

 

 

 

Extender RE200 V5 Extender Model

 

Main Router settings screen

 

 

 

Error says main router does not support OneMesh. 

The thing is extender should support the EasyMesh but it is not visible on the settings screen.

 

 

 

 

 

@woozle 

 

 

  0  
  0  
#3
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
a week ago

Error message  @trioxify 

  0  
  0  
#4
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?-Solution
a week ago - last edited a week ago

  @trioxify 

 

Please use the RE200's internal web management interface to setup the EasyMesh connection. The Tether app may not have been updated yet to reflect the features of firmware 1.0.23.

 

There are different ways to get into the web interface via a web browser.

You can try if http://tplinkrepeater.net/ works for you. If it doesn't, then you need to access it via its current IP address, like http://192.168.x.x, but you have to replace the x with the correct numbers.

Recommended Solution
  0  
  0  
#5
Options
Re:RE200 V5 with Archer VX1800v OneMesh? EasyMesh?
a week ago

  @woozle 

 

 

So as you mentioned I have successfully enabled easymesh on both devices. Now I have a network topology like shown above.

 

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 121

Replies: 5

Tags

OneMesh EasyMesh
Related Articles
Archer VX1800v EasyMesh ethernet backhaul
317 0
Setting up an Easy Mesh with RE705X and Archer VX1800v
994 2
OneMesh (EasyMesh?) Not Configuring Properly
2300 1
OneMesh between Archer C6 and RE200
1564 0
Archer C9 V5 OneMesh?
2006 2
Archer C7 V5 - EasyMesh Support
999 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.