Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

< All Threads

Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

Official ReleaseDeco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

David-TP

2024-09-19 11:02:24 - last edited 2024-11-14 12:06:09

Posts: 12867

Helpful: 1813

Solutions: 1299

Stories: 9

Registered: 2020-04-14

Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-19 11:02:24 - last edited 2024-11-14 12:06:09

Tags: #Firmware Update #Official #DoH/DoT

Model: Deco X50 Deco X55

Hardware Version: V1

Firmware Version:

This Article Applied to

Deco X50/X55_V1(V1.6) only

Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE

Modifications and Improvement

Note: Some features are not supported in Access Point mode.

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.

Firmware Download Link

Deco X50_V1/1.6	1.6.1_build_20241010_Official Version	Newly updated to Deco 1.12.0 Firmware Platform
Deco X55_V1/1.6	1.6.1_build_20241010_Official Version	Newly updated to Deco 1.12.0 Firmware Platform

Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery-How to Downgrade Deco.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

50 Reply

Rikko

LV1

2024-09-19 11:45:01

Posts: 19

Helpful: 19

Solutions: 0

Stories: 0

Registered: 2023-02-01

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-19 11:45:01

@David-TP

Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode will be very usefull option I think.

Thank you, I will try it!

Omochao

LV2

2024-09-19 23:00:35

Posts: 70

Helpful: 38

Solutions: 2

Stories: 0

Registered: 2024-02-05

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-19 23:00:35

@David-TP

Thanks David for updating the community despite being in the late Q4 of 2024, usually I notice TP-Link only releases big major improvement during mid of the year. but this has changed my perception of it.

Will definitely give this version a try out as they finally implemented DoH and DoT.

Zell13

LV1

2024-09-20 03:16:00

Posts: 1

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-09-20

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-20 03:16:00

This is a great news for Deco users. Will other Deco models especially the BE series (BE65, BE85 etc) receive DoT & DoH support too?

David-TP

2024-09-20 06:44:21

Posts: 12867

Helpful: 1813

Solutions: 1299

Stories: 9

Registered: 2020-04-14

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-20 06:44:21

@Zell13

Hi, yes, they are also on the plan.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Billmanakos

LV2

2024-09-21 09:30:21

Posts: 45

Helpful: 52

Solutions: 0

Stories: 0

Registered: 2019-01-04

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-21 09:30:21

Tried that, it looks like the problem with Deco app and devices not showing where are connected ( deco app shows those devices as connected to other) remains with fing enabled or disabled. PPPoE disconnects more often (once per day ) but this problem maybe temporarily

AdiPatil

LV2

2024-09-22 04:50:54 - last edited 2024-09-22 08:07:52

Posts: 22

Helpful: 10

Solutions: 0

Stories: 0

Registered: 2022-02-25

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-22 04:50:54 - last edited 2024-09-22 08:07:52

@David-TP Are this features coming to Deco x60 V3? Especially the 20 Mhz/40 Mhz channel width selection. Also how will this feature work if i have 3 deco x50 with 3 deco e4? Will e4s also shift 2.4 Ghz to 20 Mhz channel width?

Billmanakos

LV2

2024-09-22 09:17:15 - last edited 2024-09-22 13:15:01

Posts: 45

Helpful: 52

Solutions: 0

Stories: 0

Registered: 2019-01-04

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-22 09:17:15 - last edited 2024-09-22 13:15:01

@David-TP

after 1 day upgrading in to this firmware problems arises .

Devices went to "other" connection status, PPPoE connections showed as connected but the internet was lagging , WiFi (5Ghz) was full but no connection to internet , tried ping 192.168.68.1 with timeouts . Restarting didn't do anything good.

Too many issues to stay on this one, had to revert back to 1.6.0 release 61500 (20240801).
back to normal.

klellman

LV1

2024-09-23 22:42:59

Posts: 7

Helpful: 3

Solutions: 0

Stories: 0

Registered: 2023-09-09

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-23 22:42:59

@David-TP I was pretty impressed with your release cycle seeing the firmware dated 2027, but I see that the actual file is 2024

#10

David-TP

2024-09-24 01:45:05

Posts: 12867

Helpful: 1813

Solutions: 1299

Stories: 9

Registered: 2020-04-14

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-24 01:45:05

@klellman

, I haven't noticed the typos. The date has been changed and Thank you very much!

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

#11

David-TP

2024-09-24 01:49:44

Posts: 12867

Helpful: 1813

Solutions: 1299

Stories: 9

Registered: 2020-04-14

Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

2024-09-24 01:49:44

@AdiPatil

Hi, It is planned to roll out the similar firmware for other models. However, the ETA is unclear for a specific model.

"Also how will this feature work if i have 3 deco x50 with 3 deco e4? Will e4s also shift 2.4 Ghz to 20 Mhz channel width?"

- I think it should depend on the main Deco. Then the satellite Deco will follow the settings.

Thank you and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

#12

David-TP

2024-09-19 11:02:24 - last edited 2024-11-14 12:06:09

Posts: 12867

Helpful: 1813

Solutions: 1299

Stories: 9

Registered: 2020-04-14

Information

Helpful: 2

Replies: 50

Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

This Article Applied to

Deco X50/X55_V1(V1.6) only

Modifications and Improvement

Note: Some features are not supported in Access Point mode.

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode. 2. Added DoH/DoT under Deco APP>More>Advanced. 3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.

Firmware Download Link

Deco X50_V1/1.6

1.6.1_build_20241010_Official Version

Newly updated to Deco 1.12.0 Firmware Platform

Deco X55_V1/1.6

1.6.1_build_20241010_Official Version

Newly updated to Deco 1.12.0 Firmware Platform

Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode will be very usefull option I think.

Information

Voters 1

Tags

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.