Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More

Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More

Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
Yesterday - last edited Yesterday
Model: Deco BE65   Deco BE63  
Hardware Version:
Firmware Version:

This Article Applied to:

Deco BE65/BE63/BE11000_V2

 

 

 

Modifications and Bug Fixes:

1. Added Wireguard VPN feature.
2. Added HomeShield
APP block/App Time Limits feature, which supports 2000+ applications.
3. Added Channel Selection feature.
4. Added to the option to enable/disable 2.4GHz Backhaul Mode.
5. Improved stability and security of the system.
6. Fixed the issue that satellite units might be displayed as "offline" in Deco APP if there are lots of Tapo devices in the network. 
7. Fixed the issue that the clients may fail to connect to L2TP/IPSec VPN in some cases.
8. Fixed the issue that the Guest wireless may be unable to access the Internet in some cases.
9. Fix the issue of broadcasting additional Backhaul SSID after enabling 6 GHz Wi-Fi.

 

 

Firmware Download Link:

Deco BE65_V2 Deco BE65_V2_1.1.0_240923.zip
Deco BE63_V2 Deco BE63_V2_1.1.0_240923.zip
Deco BE11000_V2 Deco BE11000_V2_1.1.0_240923.zip

Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.

  0      
  0      
#1
Options
4 Reply
Re:Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
12 hours ago - last edited 9 hours ago

  @David-TP Why is this version not compatible with BE65 V1? The BE85 release was for both versions but this one not? When will the update 1.1.0 be released for BE65 V1?

It's so confusing ... 

  3  
  3  
#2
Options
Re:Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
7 hours ago

  @David-TP Do you have ETA for V1 models? 

  0  
  0  
#3
Options
Re:Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
4 hours ago - last edited 45 minutes ago

  @David-TP I would also like to know about the status of the BE63 V1. It seems like V2 is getting all the attention...

 

Genuinely, these totally invisible differences between hardware versions across all your deco products are extremely confusing, particularly when you only release firmware for one hardware revision and not the other. It makes me feel like I'm penalized for having a v1 instead of a v2, even though I had no say in the matter. And, normally I wouldn't care so much about firmware updates, but with how horribly unstable and buggy my BE63 V1 has been, I'm still holding onto hope that you might resolve some of the issues eventually.

 

I have to reboot my router seemingly every 3-5 days because of glitches, dropouts, the phone app no longer accurately showing which devices are connected or not, or the router just outright crashing of its own accord.

  0  
  0  
#4
Options
Re:Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More
43 minutes ago

  @David-TP I initially had the same issue upgrading my BE65 v2's with this official firmware, same as with the beta version. Then I tried something and it finally worked! 

So my setup consists of 3 BE65 V2's and 1 BE65 V1. I temporarily unplugged the power supply of the V1 device and finally the firmware upgrade succeeded. What I suspect is that in the firmware update web page the device selection box is broken, due to both devices being listed as plain BE65 without a V1 or V2 suffix. When the V1 device is unplugged, the selection box shows a default value of BE65 selected, whereas when V1 is online the selection box is not filled in, and the only selectable value is BE65, which I suspect is mapping to the V1 device. 

I hope this is sufficient info to reproduce the issue at your side and fix the web based firmware upgrade page in a future update. 

  0  
  0  
#5
Options