Home Network Community > All Threads > Speed Limit for Client for Deco x50 v1.3
< All Threads

Speed Limit for Client for Deco x50 v1.3

Speed Limit for Client for Deco x50 v1.3

Speed Limit for Client for Deco x50 v1.3
Speed Limit for Client for Deco x50 v1.3
2024-10-13 09:54:46 - last edited 2024-11-12 10:39:17
Tags: #Firmware Update #Feature Request #Bandwidth Control/QoS
Model: Deco X50  
Hardware Version: V1
Firmware Version: 1.2.8

I recently recommended the Deco X50 to my church, specifically because of its ability to limit the speed for individual clients. However, after purchasing the Deco X50 online, we discovered that we received v1.3, which does not currently have the "Speed Limit for Client" feature available in v1 after the 1.5.5 firmware update.
 

Could you please let us know if and when the Deco X50 v1.3 will receive a firmware update that includes the "Speed Limit for Client" feature? This functionality is important for us, and it was a key reason for choosing the Deco X50. I look forward to your response.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Speed Limit for Client for Deco x50 v1.3-Solution
2024-10-14 07:47:06 - last edited 2024-11-12 10:39:17

  @peraltadavidr 

Hi,

 

At present Deco X50 V1.3 does not have firmware to support Client Speed Limit function, and only V1.0 supports it.

We did not get a certain information whether or when the firmware for V1.3 will be released. You can keep an eye on TP-Link official webpage.

 

If it is urgent, you can contact the retailer first and check if they can change V1.0 for you first.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Speed Limit for Client for Deco x50 v1.3-Solution
2024-10-14 07:47:06 - last edited 2024-11-12 10:39:17

  @peraltadavidr 

Hi,

 

At present Deco X50 V1.3 does not have firmware to support Client Speed Limit function, and only V1.0 supports it.

We did not get a certain information whether or when the firmware for V1.3 will be released. You can keep an eye on TP-Link official webpage.

 

If it is urgent, you can contact the retailer first and check if they can change V1.0 for you first.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
Re:Speed Limit for Client for Deco x50 v1.3
2024-10-15 05:01:12

  @Sunshine The retailer won’t replace my Deco though, they said that don’t replace items that have already been opened.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 190

Replies: 2

Tags

Firmware Update Feature Request Bandwidth Control/QoS
Related Articles
my deco x50 limit my connection speed
720 0
Deco x50 device speed limit not being enforced
143 0
Low speed with TP-Link Deco X50-5G LTE WLAN Router
345 1
Built-in speed test for DECO X50 V1
212 0
Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
37754 2
Deco X50 Slow Upload Speed
1497 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.