DECO E4 Can't link second Deco device in AP mode
DECO E4 Can't link second Deco device in AP mode
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
2024-10-21 07:24:13 - last edited 2024-10-23 09:54:56
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
DECO E4 Can't link second Deco device in AP mode
2024-10-21 07:24:13 - last edited 2024-10-23 09:54:56
Tags:
#Access Point Mode
#DECO E4 AP MODE
Hi , Can someone help me with this ?
Currently I have a router with mac filtering function. I already connect the DECO E4 Main,
but when I trying to add the second DECO it's always failed.
But in Router Mode it's running perfectly.
Is there anyone can explain this to me ?
Thank you very much.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
3 Reply
Posts: 12841
Helpful: 1806
Solutions: 1298
Stories: 9
Registered: 2020-04-14
Re:DECO E4 Can't link second Deco device in AP mode
2024-10-22 03:32:46
Hi, When Deco E4 works in router mode, only the main Deco will obtain an IP address from the ISP router. But in AP mode, both units will get IP addresses from the ISP router.
Have you tried to temporarily disable the MAC Filtering or also add the MAC address of the satellite E4 to the Allow List?
Thank you very much and wait for your reply.
▶Check What's Currently Going on With Deco
▶Deco Starts Supporting Changing Wireless Channels!
▶KidShield Now Open for Trial!
Try to leave a Message if urgent help is required.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
Re:DECO E4 Can't link second Deco device in AP mode
2024-10-22 03:51:29
Hi ! Thank you for your support. There is no MAC Filtering in AP mode and I already disable it when I start setting up. The first one I tried is to Setup the main DECO E4 in Router mode and connect other 2 E4. It's working but I don't have a security. So I switch the Main E4 to AP mode, then the other 2 E4 disconnected, all 3 E4 mac address is registered in the ISP Router. Right now I can't see mac filtering settings in AP mode, the only settings that showing are 1. Operation Mode 2. Smart DHCP - Disabled ( I tried to Enable this but still no connection to others.) 3. Fast Roaming - Disabled 4. Beamforming - Enabled Thank you again.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
Re:DECO E4 Can't link second Deco device in AP mode
2024-10-22 03:51:30
Hi ! Thank you for your support. There is no MAC Filtering in AP mode and I already disable it when I start setting up. The first one I tried is to Setup the main DECO E4 in Router mode and connect other 2 E4. It's working but I don't have a security. So I switch the Main E4 to AP mode, then the other 2 E4 disconnected, all 3 E4 mac address is registered in the ISP Router. Right now I can't see mac filtering settings in AP mode, the only settings that showing are 1. Operation Mode 2. Smart DHCP - Disabled ( I tried to Enable this but still no connection to others.) 3. Fast Roaming - Disabled 4. Beamforming - Enabled Thank you again.
1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
2024-10-21 07:24:13 - last edited 2024-10-23 09:54:56
Posts: 3
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2024-10-21
Information
Helpful: 0
Views: 157
Replies: 3
Voters 0
No one has voted for it yet.
Tags
Access Point Mode
DECO E4 AP MODE
Report Inappropriate Content
Transfer Module
New message