Home Network Community > All Threads > Deco configure Roaming WIFI with Wired conected the same network and profile.
< All Threads

Deco configure Roaming WIFI with Wired conected the same network and profile.

Deco configure Roaming WIFI with Wired conected the same network and profile.

Deco configure Roaming WIFI with Wired conected the same network and profile.
Deco configure Roaming WIFI with Wired conected the same network and profile.
2 weeks ago - last edited a week ago
Tags: #Roaming
Model: Deco M9 Plus   Deco X60  
Hardware Version: V20
Firmware Version: 1.2.9

Dear All.

I have some question on Deco configuation roaming wifi with wired connected.

 

I have 10units of deco(M9 plus and X60) that are connected with wired and would like to configure roaming wifi.
If the main deco is down, Is there any affected to all deco or still working but offline appeared on deco app?

If you have any suggested, please fell free to let me know,

Thanks,

  0      
 
  0      
 
#1
Options
3 Reply
Re:Deco configure Roaming WIFI with Wired conected the same network and profile.
2 weeks ago

  @PanhaPheth 

Hi, it also depends on the current operation mode.

Under wireless router mode, if the main Deco is down, the whole Mesh will be affected.

In Access Point mode, if more than one Deco units are connected directly to the ISP router via Ethernet cables when the main Deco is down, the rest would still work but appear offline on the Deco app.

 

Thank you very much and best regards.

Check What's Currently Going on With Deco Deco Early Access Firmware Open for Test! Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco configure Roaming WIFI with Wired conected the same network and profile.
2 weeks ago
Thanks @David-TP for your prompt feedback. But we faced a challenged when we configure all Deco as access point mode in same profile, If was loop detected which auto shutdown port and connected as mesh. Do you have any suggestion on this? I think is loop by traffic running through the cable to deco and deco meshing with another nearest deco.
  0  
  0  
#3
Options
Re:Deco configure Roaming WIFI with Wired conected the same network and profile.
2 weeks ago - last edited 2 weeks ago

  @David-

Here is simple of my network currently,

TP 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 97

Replies: 3

Tags

Roaming
Related Articles
New wired network Backhaul configuration
727 0
Configuration of wired Deco M9 with Switch
797 0
TL-WR743ND configure with wired devices
583 0
Roaming off issue when deco unit disconnected
454 0
Wifi roaming
719 0
Deco x60 roaming issue
833 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.