Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > Slow wifi speed on 5GHz on all S4 units apart from the main deco

< All Threads

Slow wifi speed on 5GHz on all S4 units apart from the main deco

Xbosch

2024-10-26 09:58:07 - last edited 2024-11-07 11:20:26

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-10-26

Slow wifi speed on 5GHz on all S4 units apart from the main deco

2024-10-26 09:58:07 - last edited 2024-11-07 11:20:26

Model: Deco S4

Hardware Version: V2

Firmware Version: 1.6.2

I have a mesh of S4 units (3 of them) and one M3W unit with the main (S4) unit configured as the router connected directly to the NTE. I have 500Mb/s broadband from plusnet. When connected wired to the main unit I get 500Mb/s (or very close). On wifi connected to the main unit (from an iphone 11) I get roughly 350Mb/s but as soon as I connect to any other unit it drops to around 50Mb/s. According to the app "Everything looks good". Any idea why the wifi speeds are so slow on all the satelite units? Also, when I look through the web UI at the cpu load it always shows 100%. Not sure if this is related.

1 Accepted Solution

David-TP

2024-10-31 10:57:50 - last edited 2024-11-07 11:20:26

Posts: 12824

Helpful: 1803

Solutions: 1297

Stories: 9

Registered: 2020-04-14

Re:Slow wifi speed on 5GHz on all S4 units apart from the main deco-Solution

2024-10-31 10:57:50 - last edited 2024-11-07 11:20:26

@Xbosch

Hi, Thank you very much for your time and patience.

Did the issue start recently?

Are you able to connect the satellite S4 units via Ethernet cables to the Mesh system?

For pure WiFi Backhaul, due to the working pattern and protocol/regulation of Wi-Fi technology, the more wireless hops, the slower the speed would be. So it is hard for the satellite Deco to maintain a decent speed.

For more details, please refer to:Why is my satellite Deco unit not getting the same speed as the main Deco?

It is also suggested to unplug the Deco M3W first, then install the beta firmware here which could help customize the signal source of the satellite Deco S4.

Deco M4/S4_V2 Support Connection Preference

Thanks again and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Recommended Solution

1 Reply

David-TP

2024-10-31 10:57:50 - last edited 2024-11-07 11:20:26

Posts: 12824

Helpful: 1803

Solutions: 1297

Stories: 9

Registered: 2020-04-14

Re:Slow wifi speed on 5GHz on all S4 units apart from the main deco-Solution

2024-10-31 10:57:50 - last edited 2024-11-07 11:20:26

@Xbosch

Hi, Thank you very much for your time and patience.

Did the issue start recently?

Are you able to connect the satellite S4 units via Ethernet cables to the Mesh system?

For more details, please refer to:Why is my satellite Deco unit not getting the same speed as the main Deco?

It is also suggested to unplug the Deco M3W first, then install the beta firmware here which could help customize the signal source of the satellite Deco S4.

Deco M4/S4_V2 Support Connection Preference

Thanks again and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶KidShield Now Open for Trial! Try to leave a Message if urgent help is required.

Information

Helpful: 0

Replies: 1

Slow wifi speed on 5GHz on all S4 units apart from the main deco

Slow wifi speed on 5GHz on all S4 units apart from the main deco

Information

Voters 0

Tags