Home Network Community > All Threads > Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
< All Threads

Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?

Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?

Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
3 weeks ago - last edited 3 weeks ago
Tags: #Firmware Update
Model: Deco X20  
Hardware Version: V3
Firmware Version: 1.1.7

I'm trying to update my Deco X20's from 1.1.7 Build 20240101 Rel. 64163 to version 1.2.0,

downloaded from https://www.tp-link.com/nl/support/download/deco-x20/v3/#Firmware

file "X20 3.0_en_1.2.0 Build 20240606 Rel. 64638_US_EU_JP_B4_EG_SE_up.bin"

But after uploading it through the web interface it says:

"Upgrade failed. Please select the latest version of firmware to upgrade."

 

Trying "Online Upgrade - Upgrade firmware over the internet. (button Check for upgrades)" in the device web interface or "Update Deco" in the app will not find the newer version (which obviously is available) either.

Auto Update is enabled.

I've also tried 1.2.1 (file "X20 3.0_en_1.2.1 Build 20240723 Rel. 64983_US_EU_JP_B4_EG_SE_up.bin")

 

Why will the firmware not update to the almost 6 months newer version, automatically or manually?

I'm in the Netherlands. I operate the Deco's in English.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?-Solution
3 weeks ago - last edited 3 weeks ago

  @MaartenW 

Hi, both 1.1.8 Build 20240119 and 1.2.0 Build 20240606 are for the general Deco X20(EU/US)_3.0 versions.

However, I checked your current firmware 1.1.7 Build 20240101 which is a customized version for the local ISP, such as DFN.

Did you get the Deco units from the internet provider?

 

The new version for Deco X20(DFN) 1.2.1 Build 20240829 is in the release process now. You will detect it later via the Deco APP in the next few weeks.

 

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#5
Options
5 Reply
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
3 weeks ago

  @MaartenW 

Hi,

 

Please try upgrading to firmware version 1.1.8 Build 20240119 first.

If it still fails, please provide a screenshot of the error.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
3 weeks ago - last edited 3 weeks ago

  @Sunshine 1.1.8 failed as well…

Screenshot:

  0  
  0  
#3
Options
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
3 weeks ago - last edited 3 weeks ago

  @MaartenW 

Same error message here with model BE65(2.0) FW 1.0.6 Build 20240724 Rel. 12326 refusing to upgrade to 1.0.7_build_20240929_Pre-release version, no clues in the logs... 

  0  
  0  
#4
Options
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?-Solution
3 weeks ago - last edited 3 weeks ago

  @MaartenW 

Hi, both 1.1.8 Build 20240119 and 1.2.0 Build 20240606 are for the general Deco X20(EU/US)_3.0 versions.

However, I checked your current firmware 1.1.7 Build 20240101 which is a customized version for the local ISP, such as DFN.

Did you get the Deco units from the internet provider?

 

The new version for Deco X20(DFN) 1.2.1 Build 20240829 is in the release process now. You will detect it later via the Deco APP in the next few weeks.

 

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#5
Options
Re:Why won't my DECO X20 V3 upgrade from 1.1.7 to 1.2.0?
3 weeks ago

  @PeterFA 

Hi, the situation for Deco BE65_V2 is a little bit different.

1.0.7 Build 20240815 was removed from the Cloud server and is no longer available for firmware upgrade. A new improved version will be ready soon.

Thank you very much and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! ▶Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 150

Replies: 5

Tags

Firmware Update
Related Articles
Deco X20 V3 firmware
1026 1
Deco x20 Issues After Firmware Upgrade
574 1
Mixing Deco X20 hardware version 1.2 and 2.0
1548 0
X20 V3 firmware
198 0
Is x20 v3 with x20 v4 firmware possible?
707 0
beamforming on deco x20 v3
304 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.