@klipse 

Can I have the current Deco APP version?

Does it make any difference if you delete the Deco APP and log into the previous account again?

(Deleting the Deco APP would not mess up with the current network configuration.)

 

By the way, Did the Deco APP also report "Unable to connect to Deco" when the mobile phone is connected to the 4/5G mobile data?

Please also refer to this link to help me submit the Deco APP log:

How to submit Deco APP log

 

Wait for your reply and best regards.

 

 

  @David-TP 

 

Hi David, thanks for your reply.

 

I've submitted the App log as requested.

 

App version is 3.9.9 and up to date.

 

I've deleted the Deco app now and reinstalled it, or do you mean to do this when I have the unexpected behavior?

 

On 4G/5G the behavior is the same and makes no difference.

 

Regards

Kevin

  @klipse 

Hi, Thanks for the APP logs. It has been forwarded to the engineer for further analysis.

It is very likely the communication between Deco APP and the Cloud server was interrupted. Have you ever configured any DNS filtering or Access Control rules for the local network?

Please also check the email for more suggestions.

Best regards.

  @David-TP 

Hi David. Thank you and I've also replied to your email. I've never touched any DNS or access control rules for my local network. 
 

thanks 

 

Edited at 19:14:

 

I swapped my Decos around so my main Deco is now the XE75 Pro, I remember now why I've always had the X60 as main Deco. I've listed below an issue I had last year when I got the XE75 Pro but never made a post at the time as the X60 seemed to perform ok as main Deco.

 

Issue: With the XE75 Pro as main and X60 satelite on wireless backhaul, any device connected the satelite X60 is not seen in the online clients list altogether. 
 

On wired backhaul any wifi device connected to the satelite X60 shows as a wired connected device and under the network "map" it shows no devices connected to the satelite Deco.  Some screen shots below.

 

X60 satelite is connected directly to main XE75 Pro via ethernet cable, there is a switch but it is connected directly into the X60 satelite into the second ethernet port.

Any ideas? Can these issues be fixed or as XE75 Pro is end of life maybe it will never happen? I'm looking to go back to TP Link archer routers with easymesh as at least they work properly and when I was using them (2x C80's) I never had any issues, the above all be them small issues with the Deco its time consuming to come on here and report them etc etc....

 

I've switched off fast roaming and it made no difference.

 

Thanks

Kevin

 

1st screen snip - X60 shows no devices connected. However I know my iPad, iPhone and Firestick are connected to the satelite X60.

 

 

 

2nd screen snip - under network map I see this, devices connected via wifi to X60 are showing as wired all the time. Home CCTV is correct as a wired device into the main XE75 Pro Deco.

 

 

 

 

 

  @klipse 

Hi, Thanks for the update.

I think it can be fixed as Deco XE75 Pro is still a hero model for the Deco WiFi 6E series.

I believe the current situation may be mostly attributed to the Deco APP but I want to see what the engineers think of it.

Best regards.