Model : Hardware Version : Firmware Version : ISP : When the firewall is enabled systems connected by WiFi are blocked from the LAN. This problem has been reported before in various guises but I've...

> There is still another VLAN mode, it's called "Port-based VLAN". This probably will do what you need by allowing mixed segments. I never tried this mode, since I need 802.1Q VLANs, but maybe you...

Thsnks again for your very helpful reply. > Theoretically, yes. But in practice: if no port is a member of a given VLAN, you cannot set this VID as PVID for any port. > The switch's UI does not allow...

Sorry, a second reply, I've been looking at your table a little harder. It's what happens *within* the switch that I'm still not clear about. In my case *all* packets will be received from 'outside'...

Thanks for that very helpful reply, I'm slowly beginning to understanf VLANs. I have just a 'standalone' TL-SG108E, it's the only VLAN aware device on my system. So it seems to me that using 802.1q...

Model : TL-SG108E Hardware Version : Firmware Version : ISP : I am trying to get to grips with configuring VLANs on my new TL-SG108E. I can't at the moment see any use for 8021Q mode, however I'm...