@Tyrade Hi, I agree with @shberge, from my knowledge, the current mechanism of the EAP is to send messages to two layers at the same time, one is to send management information to the management...

@Peter_cr Hi, ER8411 has 2× 10GE SFP+ Ports (1 WAN, 1 WAN/LAN), did you connect the switch to the WAN port or the LAN port? As I see, it will work only you set the 10G wan/lan port as the lan port.

@Germanmann Hi, you can set Time-Based ACL.

Hi, Set the ACL, make sure the service type you choose has the correct port number of the anydesk. And you need to create it in the Preferences block.

@ziquro Hi, did you enable Auto Failover? What is the firmware version of your OC200? You can also try exchanging the mesh AP and the root AP for testing. And don't put the mesh APs too far away from...

@Jospher Hi, have you checked if the local OC200 is running fine? You will see if the cloud light is normally on. Test if a reboot can take it back.