@Mellx1 Device account for all adopted devices on the site in batches. Once the devices are adopted by the controller, their username and password become the same as settings in the Device Account to...

@PavelV How about upgrading the Controller version into 4.3.5 then upgrade the firmware of the router on Controller?

@MD_Service The span of upgrading the firmware is too large, controller version is 4.3.5 and is matched with 5.0.3's firmware version of EAP, on controller need to upgrade without span. The upgrade...

@binio how about enable the "IPv4 routing" option, and then check the firmware version is up to date or not, not pretty after reset can make it work or not. By default, the VLAN interface can talk to...

@Diovani hi there, different company has different VLAN mechanism, this is the old and new mechanism for tplink, it is advised to contact ubiquitin to check.

@userNAC Hi there. 1. All the setup need to be done on the OC200, after configure the setting on OC200, the OC200 will send all the setting to the router, switch and EAP. The requirement for the...