@shano81 Yes, Smart Modem LAN port to the ER605 WAN port . There will be double-NAT but at least it can keep the Smart Modem functions. Consider ER605 is just a client device of Smart Modem, so no...

@Matthius Hi How you connect your test machines? Note that the switch ACL can only take effect if the packets send to this switch. For example if you have two devices connected to the same EAP(access...

@Keirathi Hi If you connect a PC to the client CPE's PoE injector, will you receive Internet access? What IP address you get from the client CPE? I guess it could be an IP conflict issue, for example...

@shano81 Hi Try NBN Connection Box > Telstra Smart Modem > ER605>Other AP/switches. But make sure the ER605 has different subnet from your Telstra Smart Modem. ER605 default IP is 192.168.0.1, if you...

@WigTech Hi I remember there is an "Extend mode" for 1210MP? You can try to turn off that extend mode. The speed of the ports in extend mode will downgrade to 10 Mbps

@Spica1000 Hi There is no WAN bandwidth limiting. The speed you set up on WAN port is only related to bandwidth control function in LAN. It also take effect on Load Balance so higher speed WAN port...