Forums/
Pharos Wireless Bridges
2022-05-16 10:34:56
Re:With CPE point-to-point, do I need a router on the client end, or does the client device do that?
@Ecmars Yes you need another indoor Access Point/Router to share the network to WiFi. Client CPE will only provide you an Ethernet connection.
1HELPFULS
Forums/
Pharos Wireless Bridges
2022-05-16 10:24:41
@Tome_7 I think you can just download the firmware from official website, just need to change the file name to recovery.bin. CPE has a recovery mode, and we can flash the firmware via TFTP. See this...
0HELPFULS
Forums/
Wireless
2022-05-16 10:18:55
@asdasdasdasdasd If your Controller a hardware OC200? Or Software Controller? If it is software controller you may need to disable firewall/antivirus on your PC. The Controller use port 29810-29814...
0HELPFULS
Forums/
Wireless
2022-05-16 08:31:34
@Jellyhead It's hard to do it remotely without any other thing. A simple way: ask your stuff connect a PC to the EAP site router, and you can do Teamviewer/Anydesk to remote manage the PC. Then use...
0HELPFULS
Forums/
Controllers
2022-05-16 08:09:45
@Wc_Networks I saw a similar post before, but in the end it was Modem's issue. You may refer to this link.
0HELPFULS
Forums/
Switches
2022-05-14 06:08:56
@uncensored Yes they are compatible with each other. But I suggest TL-SM5110-SR since TXM431 is EOL
0HELPFULS