ReacherLV2Offline
Following: 0Followers: 0
Forums/ Pharos Wireless Bridges
2015-11-13 15:25:21
Re:DHCP problem
@ashreedeh You already set up different separate channels, which is correct. So I know you must understand some basic principles of wireless. But you are pushing too hard. One router --> 3 5210 -->...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-11-13 14:49:16
Re:How to prevent users from sharing internet through bluetoooth?
No way. And this is not something you can expect from the Access Point. You'd better set up bandwidth control on your router. No matter how many users share, they share a limited bandwidth.
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-10-09 11:38:22
Re:Correct setup for sending internet signal from one point to another
If you follow post#4 of stupidbird. You must set different channel on the 7210(on the bakery) and the second AP inside your home(the right house(). Other settings 1. Wireless settings, change Region...
0HELPFULS
Forums/ WiFi
2015-09-02 09:04:13
Re:EAP-110 Pending Needs Update EAP Controller
If you had installed a old version of controller before, it could be coursed by the old configuration on your PC. Try: 1. uninstall the EAP controller first. 2. Then download the latest controller...
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-08-26 17:56:30
Re:Newbie - Wanting to connect to outdoor WAP at Marina
Reacher wrote CPE210 will be overkill. add: I did't mean that CPE210 is too "high power", I meant TL-WA7210N is enough for this case so you don't need CPE210 (CPE210 costs more.)
0HELPFULS
Forums/ Pharos Wireless Bridges
2015-08-26 11:08:17
Re:Newbie - Wanting to connect to outdoor WAP at Marina
TL-WA7210N will meet your need. Hang up TL-WA7210N one meters higher above the roofline. Configure it as Client mode. CPE210 will be overkill.
0HELPFULS
123...