@Yannie Thanks for response. I use exactly the poe schedule on the switch to power off the AP2 during the night time. As I said, the problem is with one of the SSID that is not working on AP1 after...

I have 2 EAP660 connected to TL-SG2008P poe switch. I also have the OC200 controller connected to the same switch. Both have 4 SSID for 4 WiFi. One of the AP (let's name it AP2) is near the kids room...

@Ionut21 The solution is that you need to upgrade first to TL-SG2008P(UN)_V1_ 20210407 (ver.1.0.1) and only after to TL-SG2008P(UN)_V1_1.0.2_20210806 (ver.1.0.2)

Trying to upgrade the firmware for my TL-SG2008P switch from omada and getting: [Failed]Main Administrator Ab3T4 failed to upgrade #14_TL-SG2008P manually. I downloaded the...

@Fae Thanks for your suggestion. Have a question for you. By checking the Target Networks "All" means all the VLANs available on the switch will be tagged and pass to port 1 (in my case connected to...

@Somnus Hi @Somnus, Thanks for your response. I use pfsense as my main router so is not omada. I was following the suggested guide, but the guide is not describing a situation with multiple vlans per...