tommLV2Offline
Following: 0Followers: 1
Forums/ WiFi
2017-09-17 13:53:23
Re:AC50 - Rate Limit and Traffic Limit does not work
Hi rohwedder, Make sure you have upgraded the firmware of the CAP to the latest version as well. As it's declared on the TP-Link Website, it's important to upgrade the CAP's firmware to the latest...
0HELPFULS
Forums/ WiFi
2017-08-04 14:40:28
Re:EAP120 - unable to apply 5GHz
Hi, EAP120 is only a 2.4G AP. It has no 5G radio. Best Wishes, Tom
0HELPFULS
Forums/ WiFi
2017-08-04 14:38:57
Re:EAP225 random blocked access to certain domains
Hi NeoMod, This is strange. The EAP has only the AP mode, it's a pure L2 device. It has no Firewall, domain filter features, I cannot figure out what feature the EAP/EAP Controller have that will...
0HELPFULS
Forums/ WiFi
2017-08-04 14:28:29
Re:EAP330 connected but not accessible
Hi Grantv, The map cannot show if the AP is broadcasting the SSID. You may need to do some site survey to check if the AP is broadcasting the SSID, WiFi Analyzer is recommended, it's an Android app...
0HELPFULS
Forums/ WiFi
2017-07-13 09:19:23
Re:AC500 hardware controller
That is pretty easy, you just need to bind the SSID with that perticular AP's Radio.
0HELPFULS
Forums/ WiFi
2017-07-13 09:16:34
Re:EAP 225, No SSID after adoption
Did you try to uninstall the EAP Controller and adopt the EAP again? It seems that the EAP Controller erased the AP's original configurations but didn't issue the new configurations. The problem...
0HELPFULS
123...