I had this when I upgraded the firmware once. I used the option to save the settings then re-loaded the settings so that I did not have to re-configure - that was a mistake. It is best to upgrade...

The MR200 works well with external antennas connected using standard SMA connections on the cables. A single antenna gets a good signal but dual antennas get a better signal. I have tested a single...

It is possible to install alternative firmware on the Archer MR200. see:- https://forum.openwrt.org/viewtopic.php?id=64293 It took some time to understand how to do this but I did succeed eventually....

Model : Archer MR200 Hardware Version : Firmware Version : ISP : I have an Archer MR200 and have been trying to collect statistics from this router for each device on my network that accesses the...

Thanks danymarc. I will have to do this then:- TL-SG2210P----------PoE splitter==========passive PoE power injector----------TL-WA7510N Crazy, but it works.

Model : TL-WA7510N Hardware Version : WA7510N v1 00000000 Firmware Version : 3.12.6 Build 130427 Rel.69746n ISP : I have a TL-WA7510N AP and it is not able to be powered by a TL-SG2210P PoE switch....