@muzicman0 This article will tell you how to solve the problem you are experiencing. As the article points out, you should set policy routing on the switch and static routing on the router for your...

@ScoobieD This is the explanation for this feature and can be found by clicking on the icon next to the feature. When enabled, the controller will remember the device. After device reset and...

@NRWL The EAP115 and EAP245 are both plug and play devices. They can work as soon as they are connected to the Internet source. However, the network that broadcasts by default is an open network, for...

@alitheog As now, you cannot log in to the controller via the cloud. You can try logging in locally using the local IP address of the OC200 on the same network. Please check that the Omada Gateway...

@Jarek78 The router does support NAT loop back. For this problem, we thought it was related to the configuration. Can you show us how you configure port forwarding? Are you using WAN IP+ port number...

@sh809188 For the disconnect status, it means the connection between the EAP and the controller is broken. Also, after the update, it will disconnect for a while and then return to normal, if it...