To configure this, do we just need to add the following commans per ports in the CLI template like this ? # interface gigabitEthernet 1/0/41 switchport acceptable frame all # interface...

@Sheep_Dog There is no effective difference between using NAT translation to access a device with aspecific IP behind a 3rd router, then just having that device, with its specific IP, on a seperate...

@Vincent-TP can we get a OC200/300 beta please so i can test on actual controller hardware in my test environment please?

@Sheep_Dog You can have multiple vlans on one port. For end device, you can either use a managed switch at the other end of the run (or at each device) to do the VLAN tagging for you, or if you...

@celsius233 do you have any of the relatively basic "easy smart" switch anywhere? Even with careful per-port vlan assignment on them, they often sow up on my omada controller as connected to...

@Sheep_Dog You absolutely can assign an entire VLAN, all by itself to each ER605 port, in both standalone and controller mode. I dont understand why you dont just have as many vlans as you need, with...