@Death_Metal you can create a wired / wireless granular peer-to-peer block without resorting to port isolation / guest mode, just create an IP group with the IPs you want to isolate from each other...

@URL My suspicion here is that your WAN IP on your gateway is getting DHCP from the mobile networks via the 5g unit in some kind of bridge mode, and its not in the 192.168.254.X range that the 5g...

@AntonV Since you are using OC controller, ZTP wont actually work in that way since by default gateways dont initially look to cloud as it has to be manually enabled. As long as your port forwarding...

@Gaijin66 I think the problem might be in your static routes But, i cant really understand how they are laid out with how you have written it down Can you try and write it a bit more clearly then it...

@pustekuchen If you are trying to utilise UDP which doesn't reliably cross vlan boundary your Method will work but it will cause this - the controller will see that its all on one single mac and will...

@ohb You have to manually assign vlans to ports if you want them in access mode, same as its always been. ER8411, 6 switches, 7vlans here, all working normally (and recently all rebuilt too)