@MR.S Thants one of the things i wanted to test once my ER8411 had the adapted firmware - but i cannot now, as i had to roll back due to total network breakage!

@MR.S Yeah, you have to set every virtual WAN with a different tag - this is how it works on my adapted ER7206 v2 which im not having any issues with

@MR.S If you have router interface only VLANs it seems to work fine. My management vlan was working perfectly. For me, i found the following issues Static routes to and from the Switch vlans do not...

@Clive_A Im having MAJOR issues with this It will not route traffic to and from switch only vlans, with all the same static routes on the switches and router as i had on 1.2.3 EG Switch SVI...

@JayinNZ This only shows up when a gateway with a fully adapted firmware is adpoted and configured, which currently only the ER7206v2 with its latest beta firmware, i think

@Clive_A Bear with me, this is a bit complex! I have all these vlans 192.168.0.0/23 (management, all omada lives here) 192.168.2.0/24 (internet transit vlan) 192.168.6.0/23 192.168.8.0/23...