@HandokoF This does seem really odd. I've used my OC200 to remotely managed Omada AP's on a DDNS IP before and that worked pretty well. Is there anything in the DC controller's logs? Can you still...

@Zosha Correct, because in the Omada SDN world there is no switch functionality in a router... This breaks lots of stuff that should easily be accomplished. I have a feature request open to make the...

@Samp1983 ER605 will support VLAN on its WAN interface if you want to replace NETIS with TPLink routers. You could also replace the unmanaged switch with a managed switch and use the primary ER605 to...

@Samp1983 ER605: VLAN_1. 192.168.0.0/24 <--or whatever subnet the ER605's management IP exists VLAN_10 192.168.10.0/24 (for router1) VLAN_20 192.168.20.0/24 (for router2) SG3210: Port1 : Profile ALL...

@Samp1983 If I understand correctly what you want to do (and thanks for the Google translate BTW!) you will probably need to put a small managed switch at the repeater router location and make two of...

@Domada Hi, have you tried to 'Force Provision' the devices that are being affected by the phantom reboot setting to see if that clears it? I haven't tried it to confirm, but if the above doesn't...