Hi @terziyski Yes - but that thread is more about the other issue with the missing option to see and manage clients on the satellite AP when Ethernet Backhaul mode is active (it works in normal WiFi...

Hi @terziyski Yea - all IP address on the LAN subnet (except from the Default Gateway) should be blocked for Guest WiFi clients - But I tell you that not how it works! First of all I see no Guest...

Hi @terziyski Thanks a lot for your prompt answer. Now having cleared that the network topology is OK and "the way to do it" I have a more serious question: Looking at the Official AX55 V1 Firmware...

Hi, Just to be sure: What is TP-links recommendation for setting up EasyMesh with Ethernet Backhaul when using two AX55 WiFi devices both in Access Point mode and situated in an existing switched LAN...

Hi @Czmazel Check your DHCP server setup (static addresses etc). Why? Because around every 30-35 seconds (the local AX55 DHCP servers refreshes its DHCP lease from the main DHCP server (if you got...

Hi @Czmazel Just one small observation. Are you having a cable problem on LAN2 since it's running at 100Mbps and not at 1000Mbps or did you connect a legacy device with a 100Mbps Ethernet card? If...