@gordon861 Turning 3rd-party on and off again works until the devices are powered off. Then I have to do that all over again. So the workaround only is partially. Also it affects OpenHab. I mean...

I mean the quality of my posting is not really great, there is a lot to improve so no credit needed :D its more important that this topic gets more attention, as every vendro is spreading the...

@Lee21 AP to AP connection is the ONLY usecase where 4x4 really shines and brings a benefit. After a lot of testing it is proven that 4x4 MU-MIMO does not work, there is currently no usecase in which...

I found the issue, Im using a Unifi switches and RSTP was activated. It seems that the ER7206 was forwarding the frames from VLAN1 to VLAN2 and therefore creating the loop. after disabling RSTP it...

Hello, I have two VLANs with different networks. Both VLANs are set to untagged to only one port each. Both ports are now connected to one switch, where both ports are set to VLAN1 untagged, that...

Hello, TP-Link never replied on other requests and they are locked, so here we go again: we need a dedicated setting "Client Isolation" or "SSID Isolation" for access-points to block all L2 traffic...