RamtinRLV2Online
Following: 0Followers: 0
Forums/ Controllers
2023-01-12 04:02:05
Re:OC200 adoption and busy issues
@JonnieBeGood I'm a little confused with I've tried another new EAP225 and that's just the same, so it's not the AP. You need to see what is different at that location, such as the switch port and...
0HELPFULS
Forums/ Pharos Wireless Bridges
2023-01-12 03:35:18
Re:CPE 220: Covering 13km radius with point to point wifi
@new8n Well, this new design brought a really important question. Why do you want to cover that area? You jumped from a central design that seems to be there are other CPEs 13km far, to a square...
0HELPFULS
Forums/ Pharos Wireless Bridges
2023-01-11 22:31:35
Re:Multiple Networks - Bridging or AP
@Joeb1 It's wrong, CPE210-A (in your figure) with 0.254 address cannot have the default gateway of 1.1. they should be in the same subnet. If you want two subnets to talk to each other, there should...
2HELPFULS
Forums/ Pharos Wireless Bridges
2023-01-11 22:19:40
Re:CPE 220: Covering 13km radius with point to point wifi
@new8n If you mean, you want to overcome the interference with fast roaming, these are completely two different concepts. Access Point is not like a torch that projects signal in one direction, the...
0HELPFULS
Forums/ Cameras
2023-01-11 01:29:59
Re:How to get a picture from the VIGI C300HP-6 camera using http requests
@OleksandrTsiruk It's very old post, but I put the solutions for those who are interested. You can set the rtsp stream setting with the VIGI Security manager, then write the code to get a snapshot....
0HELPFULS
Forums/ WiFi
2023-01-11 01:13:34
Re:high latency / unreliable connection
@DiePoh Every time someone says, "I installed a new device" and "the connection is unstable", my mind goes to IP address settings issues. Can you check the obtained IP addresses of the EAPs and if...
0HELPFULS
1234...