@Fae It was 100 MBPS, so i learned the hard way regarding that. Now changed it to this in the current config, the network is just congested in the gateway end

@Fae Alright, just checked the config and also added a few tweaks on my own, currently there are less staff today so we are still smooth, will report back when the config survives an entire week

Hey! Sorry for replying so late, but ill try to modify more of the config, then see if there is any changes. Thanks

Need help in lowering the amount of Rx frames in our office network. All APs are using the standard config (all on "Auto) with both 2.4 and 5 Ghz Radios turned on. Network holds 55 to 60 Users with 2...

@KJK The Setting is gone on the Forced Mesh one, the other EAPs show that the AP is Wired and that there is no Setting for Mesh Use

I can try that too, though hard resetting is trickier as its mounted directly to the ceiling so the cable is a bit inaccessible as it is unlabled in the switches as well