@Clive_A Thanks for taking the time for a detailed reply. My subnet is currently 225.225.225.0 However I noticed that the range was configured to run from 1.100 -> 1.254 limiting me to 154 - I've...

Hi Folks I'm having a recurring and somewhat frustrating issue. I have an office network with wired and wireless devices (connected via 3x EAP620). On average there is about 145 connected clients....

Thanks everyone for your input, I was able to get this resolved last night. The main issue was that the BT router's default IP was conflicting with my site's. I disconnected the BT router from the...

Yep, but when I tried Bridge mode with PPPoE the whole system goes offine and my TP router can't get past configuring - perhpas my settings are iffy... I have three other sites and they all work off...

Hi folks thanks for your replies. I've tired both options without success but I think I know the issue now. My BT router is on the same subnet as the Omanda and I'm getting an IP conflict on restart....

Hi folks This may be an issue with my ISP modem's settings - but just in case I'm missing something at this end I thought reach out to thecommunity. I have a setup with primary WAN hooked up to one...