@jlkweb12 Unless you can get the two different computers to use different MAC addresses when in the docking statiom then they will both always be assigned the same IP address by the router via DHCP ....

@jlkweb12 It appears that both computer are also getting the same ip when connected to the docking station. That sounds like both computers are using the MAC address of the NIC in the docking...

@AftabIN ER605 V1 hardware is already end-of-life and will receive no firmware updates. As to I also want to know that in v2 can we plug different adapters in its usb port like 1- usb to lan adapter...

@Wayne-TP Thanks for the reply. As I said , I dont recall setting a specific detection area when I initially setup the D230 some months ago. That, I assume, would mean that the detection area was the...

@Wayne-TP Yes, I do have a D230S1. Everything was working fine prior to the firmware update ( on both the D230S1 and the H200 Hub ). I have the D230 set up for person and motion detection and local...

@TapoD230 I had a similar problem after the firmware update. Just got around to investigating. I found I had to redefine a Detection Zone, in the Doorbell Detection settings. Don't remember setting...