@Babun-Sikder Thank you so much for taking the time to post the issue on the TP-Link community! To better assist you, I've created a support ticket via your registered email address and escalated it...

Hi @AdrianoCM Thanks for posting here. the ER605 gateway routing table sets the 9999 priority for that subnet >>>Could you please share a screenshot showing the priority number? so all traffic is...

Hi @hifi95 The SFP port is a WAN port by default. You need to go to the management page to change it to a LAN port first. After that, it should work with the switch.

Hi @Mnetnet Thanks for posting here. Currently, we don't have a gateway that has 2.5G SFP WAN port. But only 10G SFP(such as ER7412-M2), or 2.5G ethernet WAN port(such as ER707-M2). Below is a link...

Hi @MDRAJU The following is an explanation of the DFS feature. With the DFS function enabled, the devices will monitor the frequency they are using for radar signals. If radar signals are detected on...

Hi @kokerd Thanks for posting here. This is because the LAN IP for the controller is 192.168.0.1 by default. Once the router is adopted by the router, it will apply the controller settings. To avoid...