@GRL A 1ms delay should have no noticeable impact on network usage. Now that 1ms delay persists flattly, it might be caused by a hardware connection issue, such as: The Ethernet cable connected to...

Hi @Mattrocks Mattrocks wrote @Mattrocks So I am able to connect to the EAP211 wireless bridge as long as my network on the EAP610 is different from the other AP and bridge. If I try and change the...

Hi @frankz66 Thanks for the reply. As for the low signal issue, you may refer to the following: 1) Move the Mesh EAP closer to the uplink EAP; 2) Avoid obstacles and wireless interference between the...

Hi @Elfarahidy Both devices support 802.11 a/n, so the CPE510 can connect to the ARCHER C80's 5GHz network. However, note the following: 1. Deployment Limitations: - The CPE510 is an outdoor AP,...

@KSab If this issue happens on both bands, then configure both of them.

Hi @nurix Sorry for the late reply. This is the total number of tunnels supported by the router. nurix wrote @Vincent-TP Is this limitation per wireguard interface or all peers together? example 1....