I managed to solve the problem and successfully update the remote site. I changed the HTTPS port back to the default 443 (it was previously set to 8443) and enabled the Device Management option in...

I'm also using site-to-site VPN with the controller (OC200) on the responder side (ER707-M2). VPN routing is working – I can access port 8843 from the remote subnet. I’ve opened TCP 443, even placed...

@GRL Thank you for your reply. No, I actually turned off all ACL rules to rule out that possibility. I "solved the problem" by resetting the ER605 to factory settings and forgetting it from the...

Hi all! I'm currently testing a remote site setup with an ER605 router that communicates with the Omada Controller via VPN as I would prefer not to open any ports and most of the things work great....

Hey – the issue has been resolved using the pre-release versions. LDAP is now working perfectly.

Hey guys - I had the same problem before (resolved in Thread Synology LDAP - Business Community). The problem reapeared after the last OC200 update. Can you please check? Many thanks!