@Chipsy86 Hello, Try this method (MR600v2 DREI to EU) 1- Install firmware : https://static.tp-link.com/upload/beta/2022/202208/20220812/Archer_MR600_V2_220810_DREI_to_EU.zip 2-Install EU firmware :...

@zaldasan In my experience with MR600v2 + ISP FW, most of these blocks are cosmetic only (the underlying mechanism is intact). If this is the case with nx510v, you have very good chance of unhiding...

@Lucky74 Hello, Try this method (MR600v2 DREI to EU) 1- Install firmware : https://static.tp-link.com/upload/beta/2022/202208/20220812/Archer_MR600_V2_220810_DREI_to_EU.zip 2-Install EU firmware :...

@Furittu rsrq -19 (very poor) SNR +16 (good) is pretty weird. You want rsrq -10 or better and if its on the edge constantly (-19) then speed will suffer.

@BruceEX i am running the same modem with latest eu FW 1.8 , isp tpg-au. it can run many weeks without reboot & wan address remains same. What firmware are you running ?

@Vik-2-R There is a beta EU firmware for JIO 5G isp. ** Be warned ** that you may loose access to other isp and there reports of not being able to restore the stock fw!!...